Anand Institute of Higher Technology (AIHT), Chennai

Anand Institute of Higher Technology (AIHT), Chennai was established in 2000 by the indefatigable and conscious efforts of chairman ‘kalvi Vallal’Thiru. T.kalasalingam B.com. It is one of the several professional institutes run by kalasalingam and Anandam Ammal Charities. AIHT is approved by the Government of Tamil Nadu and the All India Council for Technical Education, New Delhi. It is affiliated to the Anna University, Chennai and accredited by NBA.

The mission of AIHT is to produce technically competent, socially committed technocrats and administrators through quality education and to carry out inter disciplinary research that would contribute to the global knowledge base. Their vision is to be the centre of excellence in multi-disciplinary education and research. The institute is committed to provide high quality education and training in engineering, science and management, addressing the changing needs of industry and society to achieve customer satisfaction with continual improvement.

Campus of Anand Institute of Higher Technology

Anand Institute of Higher Technology is located in a sprawling area of 25 acres in kalasalingam nagar, IT corridor, Rajiv Gandhi road and is 15 Km away from Chennai city.

Facilities at Anand Institute of Higher Technology

  • Library
  • Classrooms
  • Laboratories
  • Transport
  • Hostels
  • Medical Center
  • Conference Hall
  • Stationeries
  • ATM Facility

Departments at Anand Institute of Higher Technology

  • Department of Computer Science Engineering
  • Department of Electronics and Communication Engineering
  • Department of Electrical and Electronics Engineering
  • Department of Mechanical Engineering
  • Department of Information Technology
  • Department of Electronics Instrumentation Engineering
  • Department of Science and Humanities
  • Department of Master of Computer Applications
  • Department of Civil Engineering
  • Department of Master of Business Administration

Bachelor of Engineering in Computer Science And Engineering

Category Computer Science and Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Computer Science and Engineering)- Stands for Bachelor of Engineering in Computer Science and Engineering. Typically, B.E(Computer Science and Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and computers. Computer Science and engineering is a discipline, which combines both electrical engineering and computer science. Subjects typically studied under this degree are designing of circuits and microprocessors etc.

Bachelor of Engineering in Electronics And Instrumentation Engineering

Category Electronics and Instrumentation Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Instrumentation Engineering)- Stands for Bachelor of Engineering in Electronics and Instrumentation Engineering. Typically, B.E.(Electronics and Instrumentation Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronic and instrumentation engineering is associated with development as well as implementation of electronic and electric instruments for recording, measuring and monitoring physical phenomena. Subjects studied under this course are designing of analog and digital electronic devices and micro-controllers programming etc.

Bachelor of Engineering in Mechanical Engineering

Category Mechanical Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Mechanical Engineering)- Stands for Bachelor of Engineering in Mechanical Engineering. Typically, B.E. (Mechanical Engineering) is a four year course, the minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Mechanical Engineering studies the principles of mechanics, materials and energy to design as well as manufacture machines and devices of all kinds. The students of mechanical engineering focus on designing as well as manufacturing of machines.

Bachelor of Engineering in Information Technology

Category Information Technology
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Information Technology)- Stands for Bachelor of Engineering in Information Technology. Typically, B.E.(Information Technology) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Information technology is an engineering division, which concentrates on study of utilization of telecommunications and computers in order to gather, store, control and disseminate information.

Bachelor of Engineering in Electronics And Communication Engineering

Category Electronics and Communications Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Communication Engineering)- Stands for Bachelor of Engineering in Electronics and Communication Engineering . Typically, B.E.(Electronics and Communication Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronics and Communications system engineering is essentially the study of converting user’s requirements for information into economical and low risk technical solutions. The students of Electronics and Communication engineering mainly focus on designing as well as testing of electronic circuits.

Master of Computer Applications

Category Computer Application
Degree MCA
Medium Campus
Mode Full Time
Level PG

Master of Business Administration

Category Business Administration
Degree MBA
Medium Campus
Mode Full Time
Level PG
M.B.A. – Stands for Master of Business Administration. Typically, an MBA is a two year postgraduate degree, eligibility for which is an undergraduate degree in business management or business administration. Subjects usually studied under this degree are Basics of Management, Statistics, Quantitative Techniques, Financial & Cost Accounting, Managerial Economics, Organizational Behavior, Marketing Management, Financial Management, Human Resources Management, Marketing Research, Industrial Relations, Consumer Behaviour, International Business , Software Solutions for Business, Relationship Marketing, Corporate Finance etc.

Master of Engineering in Communication Systems

Category Communication Systems Engineering
Degree M.E.
Medium Campus
Mode Full Time
Level PG

M.E Communication Systems Engineering – Stands for Master of Engineering (M.E.) in Communication Systems Engineering. Typically, a M.E is for 2 years the eligibility is a B.Tech/B.E degree in the relevant subject . Subjects usually studied under this degree are Statistical signal analysis,Information Theory and coding,ASIC Design,Telecom Switching System ,Networks,Network Management,Advanced Digital Communication,Wireless and Mobile Communication etc.

Master of Engineering in Communication Systems

Category Computer Science
Degree M.E.
Medium Campus
Mode Full Time
Level PG
M.E Communication Systems Engineering – Stands for Master of Engineering (M.E.) in Communication Systems Engineering. Typically, a M.E is for 2 years the eligibility is a B.Tech/B.E degree in the relevant subject . Subjects usually studied under this degree are Statistical signal analysis,Information Theory and coding,ASIC Design,Telecom Switching System ,Networks,Network Management,Advanced Digital Communication,Wireless and Mobile Communication etc.

Master of Engineering in Computer Science

Category Computer Science
Degree M.E.
Medium Campus
Mode Full Time
Level PG

Master of Engineering in Power Electronics And Drives

Category Electronics Engineering
Degree M.E.
Medium Campus
Mode Full Time
Level PG

Bachelor of Engineering in Civil Engineering

Category Civil Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Civil Engineering)- Stands for Bachelor of Engineering in Civil Engineering. Typically, a B.E.(Civil Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Civil Engineering focuses on planning, designing, and supervising the construction of facilities required for modern life. The students of civil engineering study about planning as well as designing of various facilities.

Master of Engineering in Computer Integrated Manufacturing

Category Other Engineering Subjects
Degree M.E.
Medium Campus
Mode Full Time
Level PG

Master of Engineering in VLSI Design

Category VLSI
Degree M.E.
Medium Campus
Mode Full Time
Level PG

Master of Engineering in Embedded Systems

Category Embedded Systems
Degree M.Tech.
Medium Campus
Mode Full Time
Level PG

Placement Cell at Anand Institute of Higher Technology

The training and placement cell ensures and takes care to provide the best arrangement and hospitality for the visiting company’s officials. It plays a very important and key role in counseling and guiding the students in the stages of completion of academic program of studies and entry into suitable employment. The cell also co-ordinates various activities related to the career of the students along with the industrial training. During every academic year our students are placed in well reputed multinational companies.

Top Recruiters

  • Accenture
  • Advent Net
  • Birla Soft
  • Blue Star
  • Caliber Point
  • Carevoyant
  • HCL Technologies Ltd.
  • HDFC
  • Infosys
  • Intoto Pvt.Ltd.
Name Anand Institute of Higher Technology
Location Kalasalingam Nagar, IT Corridor Old Mahabalipuram Road, Kazhipattur
City Chennai
State Tamil Nadu
Country India
Contact No 044-24353370, 24353053
Contact Email aiht_anand@yahoo.co.in
Website www.aiht.ac.in

Reviews

Leave Your Review