Karpaga Vinayaga College of Engineering and Technology (KVCET), Tamil Nadu

Karpaga Vinayaga College of Engineering and Technology (KVCET), Palayanoor was established in 2001 under the auspices of Karapaga Vinayaga Educational Trust. The college is approved by AICTE and affiliated to Anna University and accredited by NBA. The vision of KVCET is to impart quality education by providing state-of-art infrastructural facilities, sophisticated laboratory and workshop facilities and dedicated faculty and staff. The mission of the institute is providing innovative higher education with greater accentuation upon high value systems so that personnel for a strong nation- building can be shaped.

Campus of Karpaga Vinayaga College of Engineering and Technology –

Karpaga Vinayaga College of Engineering and Technology is located at GST Road, Adjacent to NH-45, nearby Maduranthagam, Kancheepuram Dist, in Tamil Nadu. It is occupying the sprawling area of 63 acres.

Facilities at Karpaga Vinayaga College of Engineering and Technology –

  • Library
  • Classrooms
  • Auditorium
  • Reprography
  • Sports
  • Cafeteria
  • Stores
  • Dining Hall
  • Medical Facility
  • Transport
  • Hostel

Departments at Karpaga Vinayaga College of Engineering and Technology –

  • Department of Biotechnology
  • Department of Computer Science Engineering
  • Department of Electronics and Communication Engineering
  • Department of Electrical and Electronics Engineering
  • Department of Informational Technology
  • Department of Mechanical Engineering
  • Department of Automobile Engineering
  • Department of Civil Engineering
  • Department of Science and Humanities
  • Department of Bio Medical Engineering
  • Department of Production Engineering
  • Department of Business Administration
  • Department of Computer Applications

Master of Bussiness Administration

Category Business Administration
Degree MBA
Medium Campus
Mode Full Time
Level PG
M.B.A. – Stands for Master of Business Administration. Typically, an MBA is a two year postgraduate degree, eligibility for which is an undergraduate degree in business management or business administration. Subjects usually studied under this degree are Basics of Management, Statistics, Quantitative Techniques, Financial & Cost Accounting, Managerial Economics, Organizational Behavior, Marketing Management, Financial Management, Human Resources Management, Marketing Research, Industrial Relations, Consumer Behaviour, International Business , Software Solutions for Business, Relationship Marketing, Corporate Finance etc.

Bachelor of Engineering in Automobile Engineering

Category Automobile Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E. Automobile Engineering – Stands for Bachelor of Engineering in Automobile Engineering. Typically, a B.E. is for four years, minimum eligibility for which is an intermediate (10 + 2) in science. Subjects usually studied under this degree are Production Technology, Environmental Science and Engineering, Applied Thermodynamics, Fluid Mechanics and Machinery, Mechanics of Machines, Fuels and Lubricants, Automotive Diesel engines, Automotive Engine Components, Automotive Electrical systems, Automotive Transmission, Automotive Materials and Metallurgy, Automotive pollution and control, Manufacturing Processes, Quality Control and Reliability Engineering etc.

Bachelor of Engineering in Electronics and Communication Engineering

Category Electronics and Communications Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Communication Engineering)- Stands for Bachelor of Engineering in Electronics and Communication Engineering . Typically, B.E.(Electronics and Communication Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronics and Communications system engineering is essentially the study of converting user’s requirements for information into economical and low risk technical solutions. The students of Electronics and Communication engineering mainly focus on designing as well as testing of electronic circuits.

Bachelor of Engineering in Computer Science & Engineering

Category Computer Science and Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Computer Science and Engineering)- Stands for Bachelor of Engineering in Computer Science and Engineering. Typically, B.E(Computer Science and Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and computers. Computer Science and engineering is a discipline, which combines both electrical engineering and computer science. Subjects typically studied under this degree are designing of circuits and microprocessors etc.

Bachelor of Engineering in Mechanical Engineering

Category Mechanical Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Mechanical Engineering)- Stands for Bachelor of Engineering in Mechanical Engineering. Typically, B.E. (Mechanical Engineering) is a four year course, the minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Mechanical Engineering studies the principles of mechanics, materials and energy to design as well as manufacture machines and devices of all kinds. The students of mechanical engineering focus on designing as well as manufacturing of machines.

Bachelor of Engineering in Electrical and Electronics Engineering

Category Electrical and Electronics Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electrical and Electronics Engineering)- Stands for Bachelor of Engineering in Electrical and Electronics Engineering. Typically, B.E.(Electrical and Electronics Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electrical and Electronics engineering encompasses study of electricity, electronics and electromagnetism in detail. The students focus on designing as well as testing of ICs, inductors, capacitors and resistors.

Bachelor of Engineering in Civil Engineering

Category Civil Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Civil Engineering)- Stands for Bachelor of Engineering in Civil Engineering. Typically, a B.E.(Civil Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Civil Engineering focuses on planning, designing, and supervising the construction of facilities required for modern life. The students of civil engineering study about planning as well as designing of various facilities.

Bachelor of Engineering in Biomedical Engineering

Category Biomedical Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E. Biomedical Engineering – Stands for Bachelor of Engineering in Biomedical Engineering. Typically, a B.E. is for four years, minimum eligibility for which is an intermediate (10 + 2) in science. Subjects usually studied under this degree are Biomechanics, Medical Imaging, Prosthetic Devices, Artificial Organs, Physiologic Modeling, Physiologic Simulation, Physiologic Control, Transport Phenomena, Biotechnology, Biomaterials, Rehabilitation Engineering, Biomedical Instrumentation, Clinical Engineering, Biosensors, Medical Informatics, Medical and Biologic Analysis etc.

Bachelor of Engineering in Production Engineering

Category Production Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E. Production Engineering – Stands for Bachelor of Engineering – Production Engineering. Typically a B.E. is a four year undergraduate programme, eligibility for which is an undergraduate degree in science. Production Engineering is the study of manufacturing technology and management science. Subjects usually studied under this degree are Engineering Mechanics, Projection and Spatial Graphics, Mathematics, Electrical Technology, Physics, Chemical Science, Manufacturing Systems, Computer Programming, Numerical Analysis, Production Processes, Analysis of Mechanisms, Thermodynamics, Mechatronics, Product Inspection, Product Control, Ergonomics etc.

Bachelor of Technology in Biotechnology

Category Biotechnology
Degree B.Tech.
Medium Campus
Mode Full Time
Level UG
B.Tech(Biotechnology)- Stands for Bachelor of Technology (Biotechnology) Typically, B.Tech(Biotechnology) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, biology and chemistry. Biotechnology is a combination of Biology and Technology and is an applied science. Subjects studied under this degree are Microbiology, Chemistry, Biochemistry, Genetics and Engineering.

Bachelor of Technology in Information Technology

Category Information Technology
Degree B.Tech.
Medium Campus
Mode Full Time
Level UG
B.Tech(Information technology)- Stands for Bachelor of Technology (Information Technology. Typically, B.Tech(Information Technology) is a four year course, the minimum eligibility for which is an intermediate (10+2) with subjects such as physics, chemistry and maths. Information technology is an engineering division, which studies utilization of telecommunications and computers in order to gather, store, control and disseminate information. Both software and hardware sectors are included in IT. The students under this degree mainly concentrate on the study of hardware and software.

Embedded System Technologies

Category M.E.
Degree MBA
Medium Campus
Mode Full Time
Level PG

Masters of Engineering in Computer Science & Engineering

Category Computer Science and Engineering
Degree M.E.
Medium Campus
Mode Full Time
Level PG
M.E.(Computer Science and Engineering)- Stands for Master of Engineering in Computer Science and Engineering. Typically, M.E.(Computer Science and Engineering) is a two year course, minimum eligibility for which is B.E(Computer Science and Engineering)or any equivalent field of engineering. Computer Science and engineering is a discipline, which combines both electrical engineering and computer science. Subjects studied under this degree are algorithms, Operating System, Programming languages, Database Management System, Computer graphics, Computer network and artificial intelligence.

Masters of Engineering in Power Electronics and Drives

Category Power Electronics and Drives
Degree M.E.
Medium Campus
Mode Full Time
Level PG
M.E. Power Electronics and Drives – Stands for Master of Engineering in Power Electronics and Drives. The M.E. degree is typically for two years, minimum eligibility for which is a degree in B.Tech. or B.E. Subjects usually studied under this degree are Advanced Engineering Mathematics, Power Electronics, Electrical Machine Analysis, Advanced Control Systems, Solid State Power Controller, Digital Signal Processing, Microcontroller Based System Design, Energy Management & Audit etc.

Masters of Engineering in Manfacturing Engineering

Category Manufacturing Engineering
Degree M.E.
Medium Campus
Mode Full Time
Level PG

Masters of Engineering in VLSI Design

Category VLSI Design
Degree M.E.
Medium Campus
Mode Full Time
Level PG

Masters of Technology in Biotechnology

Category Biotechnology
Degree M.Tech.
Medium Campus
Mode Full Time
Level PG
M.Tech(Biotechnology)- Stands for Master of Technology (Biotechnology). Typically, M.Tech(Biotechnology) is a two year course, minimum eligibility for which is a B.Tech (Biotechnology) or any relevant engineering degree with biotechnology as a subject. Biotechnology is a combination of Biology and Technology and is an applied science. Subjects studied under this degree are Microbiology, Chemistry, Biochemistry, Genetics and Engineering.

Masters in Computer Applications

Category Computer Application
Degree MCA
Medium Campus
Mode Full Time
Level PG

Placements at Karpaga Vinayaga College of Engineering and Technology –

The placement cell at KVCET assists graduating students in securing positions in reputed national and multinational companies. They also train their students in group discussion skills, interview skills, drafting job applications and provide up to date employment trends and career information so that the students will face the interview with utmost confidence.

Top Recruiters –

  • Zeka Technologies
  • IDBI
  • Cryo Banks
  • Protech Soft
  • Bashgo
  • HCL
  • HDFC Bank
  • Hewlett Packard
  • Himalayan Drugs
  • Tata Indicom
Name Karpaga Vinayaga College of Engineering and Technology
Location GST Road, Chinna Kolambakkam Palayanoor PO, Maduranthagam Tk
City Kancheepuram
State Tamil Nadu
Country India
Contact No 044-2759 8232/33
Contact Email
Website www.kvcet.in

Reviews

Leave Your Review