Sri Chandrasekharendra Saraswathi Vishwa Mahavidyalaya (SCSVM), Kanchipuram

Sri Chandrasekharendra Saraswathi Vishwa Mahavidyalaya (SCSVM), Kanchipuram was established in 1993. The university was founded under the aegis of Sri Kanchi Kamakoti Peetam Charitable Trust. The University has a unique focus on integrating traditional knowledge with modern scientific practices with a global outlook. The university is approved by UGC in 2009. The vision of the university is to provide quality higher education coupled with Indian value system and at the same time makes it affordable to all sections of the society irrespective of their social or economic standing.

The university envisages a culture that is characterized by excellent faculty-student interaction and prevalence of one family atmosphere. The emphasis is not on mere acquisition of knowledge and its application but on the all-round personality development of the student and his value system. Education is viewed not as accumulation of ideas, but as a process of channelizing them to perfection, leading to proper development of the faculties of the student and hence life making.

Campus of Sri Chandrasekharendra Saraswathi Vishwa Mahavidyalaya

University is located in a sprawling complex of 50 acre at Enathur, at a distance of about 4 kilometres from Kanchipuram. The University has a campus in Poonamalle, Chennai, housing an Ayurveda College, research centre and hospital.

Facilities at Sri Chandrasekharendra Saraswathi Vishwa Mahavidyalaya –

Facilities at Sri Chandrasekharendra Saraswathi Vishwa Mahavidyalaya

  • Classrooms
  • Internet Centers
  • Library
  • Laboratory
  • Medical Centre
  • Transport
  • Hostel
  • Transport
  • Scholarship

Faculties at Sri Chandrasekharendra Saraswathi Vishwa Mahavidyalaya

  • Faculty of Sanskrit & Indian Culture
  • Faculty of Engineering & Technology
  • Faculty of Science
  • Faculty of Management
  • Faculty of Human Resource
  • Faculty of Commerce
  • Faculty of Arts & Humanities
  • Faculty of Education
  • Faculty of Health Science

Bachelor of Engineering in Electronics & Communication Engineering

Category Computer Science and Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Computer Science and Engineering)- Stands for Bachelor of Engineering in Computer Science and Engineering. Typically, B.E(Computer Science and Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and computers. Computer Science and engineering is a discipline, which combines both electrical engineering and computer science. Subjects typically studied under this degree are designing of circuits and microprocessors etc.

Bachelor of Engineering in Electronics & Communication Engineering

Category Electronics and Communications Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Communication Engineering)- Stands for Bachelor of Engineering in Electronics and Communication Engineering . Typically, B.E.(Electronics and Communication Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronics and Communications system engineering is essentially the study of converting user’s requirements for information into economical and low risk technical solutions. The students of Electronics and Communication engineering mainly focus on designing as well as testing of electronic circuits.

Bachelor of Engineering in Electrical & Electronics Engineering

Category Electrical and Electronics Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electrical and Electronics Engineering)- Stands for Bachelor of Engineering in Electrical and Electronics Engineering. Typically, B.E.(Electrical and Electronics Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electrical and Electronics engineering encompasses study of electricity, electronics and electromagnetism in detail. The students focus on designing as well as testing of ICs, inductors, capacitors and resistors.

Bachelor of Engineering in Mechanical Engineering

Category Mechanical Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Mechanical Engineering)- Stands for Bachelor of Engineering in Mechanical Engineering. Typically, B.E. (Mechanical Engineering) is a four year course, the minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Mechanical Engineering studies the principles of mechanics, materials and energy to design as well as manufacture machines and devices of all kinds. The students of mechanical engineering focus on designing as well as manufacturing of machines.

Bachelor of Engineering in Civil Engineering

Category Civil Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Civil Engineering)- Stands for Bachelor of Engineering in Civil Engineering. Typically, a B.E.(Civil Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Civil Engineering focuses on planning, designing, and supervising the construction of facilities required for modern life. The students of civil engineering study about planning as well as designing of various facilities.

Bachelor of Engineering in Electronics & Instrumentation Engineering

Category Electronics and Instrumentation Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Instrumentation Engineering)- Stands for Bachelor of Engineering in Electronics and Instrumentation Engineering. Typically, B.E.(Electronics and Instrumentation Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronic and instrumentation engineering is associated with development as well as implementation of electronic and electric instruments for recording, measuring and monitoring physical phenomena. Subjects studied under this course are designing of analog and digital electronic devices and micro-controllers programming etc.

Bachelor of Engineering in Information Technology

Category Information Technology
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Information Technology)- Stands for Bachelor of Engineering in Information Technology. Typically, B.E.(Information Technology) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Information technology is an engineering division, which concentrates on study of utilization of telecommunications and computers in order to gather, store, control and disseminate information.

Bachelor of Arts in Sanskrit

Category Other Arts Subjects
Degree B.A.
Medium Campus
Mode Full Time
Level UG
B.A.(Other Arts Subjects) – Stands for Bachelor of Arts in Other Arts Subjects. Typically, a B.A is a three year program, minimum eligibility for which is an intermediate(10+2). Bachelor of Arts is a vast field and offers various courses. The course offered in this degree are B.A. in Women Studies and B.A. in Tourism Management etc.

Bachelor of Education

Category Education
Degree B.Ed.
Medium Campus
Mode Full Time
Level PG
B.Ed. – Stands for Bachelor of Education. Typically, a B.Ed. is a one year course, minimum eligibility for which is an intermediate (10+2) in any discipline. This degree is meant for future educators and education administrators. Subjects usually studied under this degree are Principles of Education, Fundamentals of Teaching, Educational Psychology, Sociology of Education, Guidance & Counseling, Educational Evaluation, Curriculum & Instruction etc.

Bachelor of Science in Computer Science

Category Computer Science
Degree B.Sc.
Medium Campus
Mode Full Time
Level PG
B.Sc. Computer Science – Stands for Bachelor of Science in Computer Science. Typically, a B.Sc. is a three year course, minimum eligibility for which is an intermediate (10+2) in science. Computer Science is the study of the theoretical foundations of information and computation, and the practical methods of implementation and application in computer systems. Subjects usually studied under this degree are Software Engineering, System Software, Computer Architecture and Organization, Data Structures, Data Algorithms, Operating Systems, Database Management Systems, Computer Fundamentals, C Programming, Java and Unix Programming etc.

Bachelor of Computer Applications

Category Computer Application
Degree BCA
Medium Campus
Mode Full Time
Level UG
M.E.(Computer Science and Engineering)- Stands for Master of Engineering in Computer Science and Engineering. Typically, M.E.(Computer Science and Engineering) is a two year course, minimum eligibility for which is B.E(Computer Science and Engineering)or any equivalent field of engineering. Computer Science and engineering is a discipline, which combines both electrical engineering and computer science. Subjects studied under this degree are algorithms, Operating System, Programming languages, Database Management System, Computer graphics, Computer network and artificial intelligence.

Bachelor of Ayurveda, Medicine and Surgery

Category Other Science Subjects
Degree B.Sc.
Medium Campus
Mode Full Time
Level UG

Bachelor of Engineering in Electrical & Electronics Engineering

Category Electrical and Electronics Engineering
Degree B.E.
Medium Campus
Mode Part Time
Level UG
B.E.(Electrical and Electronics Engineering)- Stands for Bachelor of Engineering in Electrical and Electronics Engineering. Typically, B.E.(Electrical and Electronics Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electrical and Electronics engineering encompasses study of electricity, electronics and electromagnetism in detail. The students focus on designing as well as testing of ICs, inductors, capacitors and resistors.

Bachelor of Engineering in Electronics & Communication Engineering

Category Electronics and Communications Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Communication Engineering)- Stands for Bachelor of Engineering in Electronics and Communication Engineering . Typically, B.E.(Electronics and Communication Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronics and Communications system engineering is essentially the study of converting user’s requirements for information into economical and low risk technical solutions. The students of Electronics and Communication engineering mainly focus on designing as well as testing of electronic circuits.

Bachelor of Engineering in Mechanical Engineering

Category Mechanical Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Mechanical Engineering)- Stands for Bachelor of Engineering in Mechanical Engineering. Typically, B.E. (Mechanical Engineering) is a four year course, the minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Mechanical Engineering studies the principles of mechanics, materials and energy to design as well as manufacture machines and devices of all kinds. The students of mechanical engineering focus on designing as well as manufacturing of machines.

Bachelor of Engineering in Electronics & Instrumentation Engineering

Category Electronics and Instrumentation Engineering
Degree B.E.
Medium Campus
Mode Part Time
Level UG
B.E.(Electronics and Instrumentation Engineering)- Stands for Bachelor of Engineering in Electronics and Instrumentation Engineering. Typically, B.E.(Electronics and Instrumentation Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronic and instrumentation engineering is associated with development as well as implementation of electronic and electric instruments for recording, measuring and monitoring physical phenomena. Subjects studied under this course are designing of analog and digital electronic devices and micro-controllers programming etc.

Bachelor of Engineering in Computer Science & Engineering (Lateral Entry)

Category Computer Science and Engineering
Degree B.E.
Medium Campus
Mode Part Time
Level UG
B.E.(Computer Science and Engineering)- Stands for Bachelor of Engineering in Computer Science and Engineering. Typically, B.E(Computer Science and Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and computers. Computer Science and engineering is a discipline, which combines both electrical engineering and computer science. Subjects typically studied under this degree are designing of circuits and microprocessors etc.

Bachelor of Engineering in Electronics & Communication Engineering (Lateral Entry)

Category Electronics and Communications Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Communication Engineering)- Stands for Bachelor of Engineering in Electronics and Communication Engineering . Typically, B.E.(Electronics and Communication Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronics and Communications system engineering is essentially the study of converting user’s requirements for information into economical and low risk technical solutions. The students of Electronics and Communication engineering mainly focus on designing as well as testing of electronic circuits.

Bachelor of Engineering in Information Technology (Lateral Entry)

Category Information Technology
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Information Technology)- Stands for Bachelor of Engineering in Information Technology. Typically, B.E.(Information Technology) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Information technology is an engineering division, which concentrates on study of utilization of telecommunications and computers in order to gather, store, control and disseminate information.

Bachelor of Engineering in Electrical & Electronics Engineering (Lateral Entry)

Category Electrical and Electronics Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electrical and Electronics Engineering)- Stands for Bachelor of Engineering in Electrical and Electronics Engineering. Typically, B.E.(Electrical and Electronics Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electrical and Electronics engineering encompasses study of electricity, electronics and electromagnetism in detail. The students focus on designing as well as testing of ICs, inductors, capacitors and resistors.

Bachelor of Engineering in Mechanical Engineering (Lateral Entry)

Category Mechanical Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Mechanical Engineering)- Stands for Bachelor of Engineering in Mechanical Engineering. Typically, B.E. (Mechanical Engineering) is a four year course, the minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Mechanical Engineering studies the principles of mechanics, materials and energy to design as well as manufacture machines and devices of all kinds. The students of mechanical engineering focus on designing as well as manufacturing of machines.

Bachelor of Engineering in Electronics & Instrumentation Engineering (Lateral Entry)

Category Electronics and Instrumentation Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Electronics and Instrumentation Engineering)- Stands for Bachelor of Engineering in Electronics and Instrumentation Engineering. Typically, B.E.(Electronics and Instrumentation Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths, computers and chemistry. Electronic and instrumentation engineering is associated with development as well as implementation of electronic and electric instruments for recording, measuring and monitoring physical phenomena. Subjects studied under this course are designing of analog and digital electronic devices and micro-controllers programming etc.

Bachelor of Engineering in Civil Engineering (Lateral Entry)

Category Civil Engineering
Degree B.E.
Medium Campus
Mode Full Time
Level UG
B.E.(Civil Engineering)- Stands for Bachelor of Engineering in Civil Engineering. Typically, a B.E.(Civil Engineering) is a four year course, minimum eligibility for which is an intermediate (10+2) with subjects such as physics, maths and chemistry. Civil Engineering focuses on planning, designing, and supervising the construction of facilities required for modern life. The students of civil engineering study about planning as well as designing of various facilities.

Master of Business Administration in Finance

M.B.A. Finance – Stands for Master of Business Administration in Finance. Typically, an MBA is a two year postgraduate degree, eligibility for which is an undergraduate degree in business management or business administration. Subjects usually studied under this degree are Essentials of Management, Managerial Economics, Management Accounting, Organizational Behaviour, Taxation Management, Commercial Bank Management, International Finance and Financial Engineering, Mergers and Acquisitions, Financial Services, Security Analysis and Portfolio Management, Derivative Securities etc.

Master of Business Administration in Marketing

Category Finance
Degree MBA
Medium Campus
Mode Full Time
Level PG

Master of Business Administration in Human Resources

Category Marketing
Degree MBA
Medium Campus
Mode Full Time
Level PG

Master of Business Administration in Systems

Category Human Resource Management
Degree MBA
Medium Campus
Mode Full Time
Level PG

Master of Business Administration in Operations

Category Other MBA Courses
Degree MBA
Medium Campus
Mode Full Time
Level PG

Master of Business Administration in Infrastructure

Category Operations Management
Degree MBA
Medium Campus
Mode Full Time
Level PG

Master of Business Administration in Tourism

Category Other MBA Courses
Degree MBA
Medium Campus
Mode Full Time
Level PG
Category Other MBA Courses
Degree MBA
Medium Campus
Mode Full Time
Level PG

Top Recruiters –

  • Atos India
  • CSS Corporation
  • CTS
  • HCL
Name Sri Chandrasekharendra Saraswathi Vishwa Mahavidyalaya (SCSVM), Kanchipuram
Location Sri Jayendra Saraswathi Street
City Chennai
State Tamil Nadu
Country India
Contact No 044-27264293, 27264308
Contact Email registrar@kanchiuniv.ac.in
Website http://kanchiuniv.ac.in/

Reviews

Leave Your Review